Iec 60529 FCC Testing Labs Services Mechanical Shovel Excavator Third-party authentication service

Provide all kinds of industrial machinery products testing certification

It mainly includes agricultural machinery, mining equipment, metallurgical equipment, power equipment, chemical equipment and working mother machinery and other manufacturing industries. Machinery manufacturing industry is the heart of the industry, it industry, agriculture, transportation, national defense, etc. To provide technical equipment, is the material of the national economy and defense modernization technology base, therefore, machine-building industry developed or not and machine and equipment level of self-sufficiency is to measure a country's economic development level and the real symbol of the levels of science and technology. There are many categories of machine manufacturing, which has become the largest industrial system with dozens of independent production departments. Because of the complex structure of machine products, parts and components, strong technology, so the implementation of production specialization, standardization, automation for the development of machine manufacturing industry is of great significance.

Product range:

Agricultural machinery, mining equipment, metallurgical equipment, power equipment, chemical equipment, digging machinery, shovel transport machinery, construction lifting machinery, motor industrial vehicles, compaction machinery, road machinery, piling machinery, concrete machinery, steel processing machinery, decoration machinery, drilling machinery, other special construction machinery

The excavator is an earth-moving machine that excavates materials higher or lower than the bearing surface with a bucket and loads them into a transport vehicle or offloads them to a storage yard. The material excavated by the excavator is mainly soil, coal, silt and soil and rock after pre-loosening. From the development of construction machinery in recent years, the development of excavator is relatively fast, excavator has become one of the most important construction machinery in engineering construction.

Service project:

1. Testing standard (part)

Declare that the machine meets the requirements of the following EU directives:
2006/42/EC- Machinery Directive:
2000/14/EC1- Directive on Environmental Noise Emission from Equipment Used Outdoors:
2004/108/EC- Electromagnetic Compatibility Directive.
Name and address of the manufacturer and its EU representative, if applicable.
Machine description, including name and serial number. The serial number on the D0C must be the same as the serial number marked on the machine.
Names and addresses of EU personnel, if requested by the appropriate EU institutions, can be contacted to prepare technical documentation on machine safety.
The name and address of the person who keeps the noise emission technical documentation and the name of the notified body involved.
Compliance assessment procedures followed by noise emissions (e.g., Annex V procedure 1).
Measured sound power level.
Ensure sound power level.
The date and place of the declaration

Show the identity and signature of the person claiming it.

Engine exhaust emission
All excavators with 18 to 560kW diesel engines must comply with EU Directive 2012/46/EU (as amended) when the engines first enter the EU market. When the machines are cleared, the engines imported into the EU will be put on the market. Engine compliance can be checked as follows:
Open the hood and look for the nameplate on the engine. The instruction requires that the board be visible in the machine. If there is no visible data plate, the machine does not meet the requirements.
Noise emissions
All excavators must be marked with their guaranteed sound power levels. The maximum allowable guaranteed sound power level depends on the engine power. Check the machine's marked power supply and check the sound power limits in the table below.
Improve security
Excavators are usually used for lifting. If the excavator is equipped with a hoist, EU safety regulations apply. Check whether the excavator is equipped with a lifting point
Warnings and Marks
Information and warnings about the machine must be in pictograms or community language for the country/region where the machine is put on the market or in use.

The standards applicable to mechanical products are generally divided into the following categories:

Class A standards (Basic safety standards)
It is mainly about basic concepts, design principles and general requirements applicable to all machinery.
Class B standards (safety standards)

are mainly used to deal with a safety situation or a related safety facilities, which can be widely used in a variety of machinery;
Class B1 standards for specific safety conditions (e.g., safe distance, surface temperature, noise)

The B2 standard is for relevant safety facilities (e.g., two-hand controls, interlocking devices, pressure sensing devices, shields).
Class C standards (Machine safety standards)

are mainly used for the detailed safety requirements of a particular type or class of machines.
Class C standard has the highest authority among these three standards, that is, if the same machine adopts class A, B and C standards at the same time, the requirements of class C standard have the highest priority. Class C standards are usually also called product standards. For example, EN201- Safety Requirements for Injection Molding Machines, which provides detailed and specific requirements for all possible risks of injection molding machines, basically including or referring to the requirements of class A and class B standards related to this type of products.

The most commonly used A, B and C standards for mechanical products are:
Class A standard: ENISO12100: Basic design Principles for Mechanical safety - Risk assessment and risk mitigation; .
Class B standard: ENISO13857: Safety of machinery - safe distance to prevent extension of upper and lower limbs and hazardous areas;
ENISO4413: Hydraulic systems - General requirements and safety specifications for hydraulic systems and hydraulic components;
ENISO4414: Pneumatic systems - General requirements and safety specifications for hydraulic systems and hydraulic components
EN1088: Safety of machinery - Interlocking devices mounted on shields - General principles of design and methods of selection;
EN953: Safety of machinery - General requirements for the design and construction of stationary and mobile shields;
En60204-1: Safety of machinery - Mechanical electrical equipment - Part 1: General requirements.

Class C standard :EN201: Plastics and rubber machinery - Safety requirements for injection molding machines
En415-1: Safety of packaging machinery - Part 1: Terminology and classification of packaging machinery and related equipment;
En415-5: Safety of packaging machinery - Part 5: balers;
En474-1: Earth-moving machinery - Basic safety requirements
EN692: Machine tools - Safety of mechanical presses;
EN693: Machine tools - Safety of hydraulic presses;
EN860: Woodworking machinery - Single plane;
EN869: Safety of machinery - Metal die casting machines;
EN1493: Automotive lifter;
EN12417: Machine tools - Safety requirements for machining centres;
EN12717: Safety of machine tools - Drilling press;

Environmental reliability Testing

High and low temperature resistance test, heat and humidity resistance, high and low temperature impact, high and low temperature alternating, mechanical vibration, mechanical impact, low pressure (vacuum) test, IP grade, dustproof water release test, gas corrosion (single/multiple), salt spray corrosion test (neutral, acid, compound), etc.

Class specific tests

Battery charging and discharging test, impact test, impact test, drop test, ROhs testing, REACH, halogen detection, temperature and humidity environment test, failure analysis, components selection, pressure test, light aging test, sand and dust test, get wet in the rain test, vibration test, high speed test, mechanical shock test, biological environment test, salt spray test and reliable integrated environment Sex test, simulated packaging and transportation test, gas corrosion test, slice test, etc.

Energy efficiency test

Energy saving testing, energy efficiency testing

Electrical performance testing

Operating voltage, operating current, speed range, power, conductivity, dielectric constant, dielectric loss, field strength (breakdown voltage), etc

2. Certification services

The test report issued by Global Zhongyi has legal effect and can be used in scenarios such as the entry of supermarkets, product appeals, anti-malicious rights protection, and auctions (appeals and auctions must meet Party A's testing requirements).